India

In a first, IIT team develops organic solar cell to convert steel roof into power source

Researchers at IIT Kanpur have developed organic solar cell devices consisting of a combination of an organic polymer and PCBM (an organic semiconductor) developed on steel substrates which can potentially convert a steel roof into an energy-producing device with greater efficiency than those currently available in the market, according to information provided by the Ministry of Science and Technology.

The research carried out at the laboratory of Prof. Ashish Garg at IIT Kanpur demonstrated the integration of multi-layered electrodes of configuration MoO3/Au/MoO3 with the organic solar cells. It was published in the journal ‘Energy Technology’.

These electrodes offer higher optical transmission as compared to only metallic electrodes. The devices with multilayer electrodes showed a clear improvement in the photovoltaic performance by 1.5 times, as compared with those obtained with single-layer top metal electrodes of gold.

The potential of third-generation solar cell technologies lies in their integration with flexible and conformal surfaces. However, this integration requires developing new top transparent conducting electrodes as alternatives to indium tin oxide, an optoelectronic material currently in use and poses limitations because of its brittleness and as its optoelectronic efficiency varies with temperature, the statement said.

The materials and device fabrication of perovskite and organic solar cells took place in the Class 10000 clean room facility at IIT Kanpur, which was supported by funding from DST under the DST-RCUK APEX project. The facility can carry out the complete fabrication of organic and perovskite solar cells. It consists of two interconnected 4-port glove boxes maintained under a nitrogen gas environment, has the capacity for handling chemicals that are sensitive to atmospheric components, mainly moisture and oxygen, and has a vacuum annealing chamber. The glove box is integrated with a spin coater, a solar simulator, a thermal annealing setup, and a high-vacuum multi-channel thermal evaporator.

AddThis Website Tools
IN Bureau

Recent Posts

India to build first-ever Polar Research Vessel as GRSE signs MoU with Norway’s Kongsberg

India's Garden Reach Shipbuilders and Engineers Limited (GRSE) has signed a Memorandum of Understanding (MoU)…

9 hours ago

“France is one of India’s best economic partners”: French Minister Saint-Martin on meeting with Piyush Goyal

French Foreign Trade Minister Laurent Saint-Martin on Tuesday reaffirmed the "conviction" that France is one…

10 hours ago

“Results and how you act are important,” CDS Gen Anil Chauhan clarifies position on losses during Op Sindoor

Chief of Defence Staff (CDS) General Anil Chauhan delivered a special lecture on 'Future Wars…

11 hours ago

Indian companies post satisfactory Q4 results despite global challenges: Bank of Baroda Report

Corporate performance of Indian companies in the fourth quarter of financial year 2025 remained satisfactory…

14 hours ago

China ramps up military pressure on Taiwan with 70 warships, 75 jets in may amid invasion threat

Beijing sent two aircraft carrier strike groups and numerous warships to the waters both north…

15 hours ago

PM Modi speaks to Assam, Sikkim CMs and Manipur Governor over flood situation, assures full support

Prime Minister Narendra Modi on Tuesday spoke to Assam Chief Minister Himanta Biswa Sarma, Sikkim…

16 hours ago